Interior Soft & Commercial Gut Demolition in Roseville
Non-Structural Strip-Outs, Remodel Demo & Commercial Tenant Build-Outs.
Stripping out non-structural interior walls, commercial retail spaces, or residential kitchens in Roseville requires clean, dust-controlled interior demolition. Our specialized interior demo crews strip spaces down to structural studs and concrete subfloors, providing a clean canvas for general contractors and remodelers.
- OSHA Silica Dust Control Compliant (29 CFR 1926.1153)
- HEPA Air Scrubbing & Negative Pressure Containment
- Selective Interior Demolition for Residential & Commercial
Selective Interior Strip-Out & Gut Demolition Services
We support residential remodelers, commercial tenant improvement (TI) contractors, and property managers:
- Residential Kitchen & Bath Strip-Outs: Removal of cabinetry, countertops, tile backsplashes, bathtubs, drywall, and subflooring down to wall studs.
- Commercial Tenant Build-Out Gutting: Full interior strip-out of retail spaces, office suites, and restaurants, removing drop ceilings, partition walls, electrical conduits, and flooring.
- Non-Structural Wall Removal: Selective removal of non-load-bearing interior partition walls, plaster, and drywall.
Residential Kitchen & Bath Strip-Out ($1,800 - $4,500)
Includes selective removal of fixtures, drywall, cabinetry, flooring, debris bagging, and off-site disposal.
Commercial Office or Retail Strip-Out ($4,500 - $15,000)
Includes full interior gutting of commercial suites up to 5,000 sq ft, removing drop ceilings, partition framing, flooring, and MEP rough-ins.
Robotic Interior Strip-Out & OSHA Silica Dust Containment
Stripping gypsum drywall, lath and plaster walls, drop ceilings, and commercial tile flooring in enclosed spaces requires strict dust suppression to protect indoor air quality. Our interior crews establish plastic containment barriers and negative air pressure systems.
Utilizing a Husqvarna DXR 140 remote-controlled demolition robot paired with HEPA-filtered air scrubbers, tight commercial interiors are gutted safely with zero diesel emissions inside buildings. All work strictly complies with the OSHA Respirable Crystalline Silica Standard (29 CFR 1926.1153).
Our 3-Step Interior Demolition Process
We manage your site footprint from initial permit application to final soil compaction, providing a completely hands-off experience for the property owner.
Step 1 - Containment Barrier & HEPA Setup
We install floor protection, seal doorways with zippered plastic containment barriers, and activate HEPA negative air machines.
Step 2 - Selective Non-Structural Strip-Out
Using specialized electric and robotic tools, we strip drywall, ceilings, framing, and tile down to bare structural studs.
Step 3 - Debris Bagging, Decontamination & Site Inspection
We haul bagged debris cleanly through designated access paths, vacuuming all surfaces to deliver a dust-free space for trade contractors.
Why Roseville Remodelers & Commercial Contractors Choose Pina Excavating for Interior Demolition
Interior demolition looks simple on paper — remove walls, strip tile, gut the kitchen. In practice, it is one of the most liability-dense phases of any residential or commercial renovation project. Drywall dust from pre-1980 homes contains crystalline silica at concentrations that cause occupational lung disease under prolonged exposure. Lead paint on window trim and baseboards is a regulated hazardous material under California Health and Safety Code. Undisclosed asbestos in vinyl floor tile adhesive is a DTSC reportable substance. None of these risks are visible to the naked eye, and none of them become your contractor’s problem if they were not discovered before demolition began.
Pina Excavating’s interior demolition protocol begins with a systematic pre-demolition material assessment. We identify all potential regulated materials by construction date, building material type, and prior renovation history before any mechanical strip-out begins. If testing is warranted, we coordinate California-licensed inspectors and licensed abatement contractors to clear the site before our crews arrive with tools.
Our Husqvarna DXR 140 remote-controlled demolition robot eliminates the largest silica exposure risk in interior demolition — operator proximity to the breaking surface. By operating the robot from a dust-contained control station, our crew avoids direct breathing zone exposure to respirable silica particles generated during drywall and tile impact. Combined with our HEPA negative air pressure machines, we consistently deliver interior strip-outs that pass post-demolition air quality clearance readings required by OSHA 29 CFR 1926.1153.
Is Interior Soft Demolition the Right Service for You?
You are the right client for this service if any of the following apply:
Residential Homeowners Planning a Full Kitchen or Bathroom Remodel
If your general contractor has told you the kitchen needs to be stripped to the studs before new cabinets, countertops, or plumbing rough-ins can begin, you need a selective interior demolition crew before your GC’s team arrives. Hiring a professional demo crew for a 1 to 2 day strip-out is faster, cleaner, and significantly less expensive than paying your GC’s hourly rate for the same work.
Real Estate Investors & House Flippers Working in Roseville, Rocklin & Citrus Heights
If you have acquired a distressed property and need to gut kitchens, bathrooms, or laundry rooms quickly to start renovation on a tight timeline, interior demolition is the first and fastest phase of your project. We can typically schedule a residential gut within 48 to 72 hours of your call, leaving a clean, swept space ready for your framing and electrical crews.
General Contractors Subcontracting Demo on Renovation Projects
If you are a licensed general contractor in Placer or Sacramento County managing a residential renovation and want a dedicated, insured interior demolition subcontractor — not your own crew pulling permits and running demo — call us. We provide certificates of insurance, signed lien waivers, and OSHA compliance documentation required by your project’s prime contract on request.
Commercial Landlords & Tenant Improvement Contractors
If you manage retail space, office suites, or restaurant locations in Roseville’s Galleria corridor, Stanford Ranch commercial plazas, or Rocklin’s business parks, we specialize in overnight and weekend interior gut demolition that minimizes disruption to neighboring tenants and meets your project’s TI construction schedule.
Local Service Areas & Interior Demo Coverage
We provide dust-controlled interior soft demolition and commercial gutting across Placer, Sacramento, and El Dorado Counties:
Roseville Metro
- East Roseville Office Suites
- West Roseville Residential
- Galleria Commercial Corridor
- Sun City Roseville
Granite Bay & Rocklin
- Stanford Ranch Business Plazas
- Whitney Ranch Communities
- Granite Bay Luxury Kitchens
Lincoln & Loomis
- Folsom Office Parks
- El Dorado Hills Retail
- Citrus Heights & Orangevale
- Fair Oaks & Antelope
Sacramento & Folsom TI Corridors
- Twelve Bridges Retail
- Sun City Lincoln Hills
- Loomis Properties
Ready to Strip Out Your Interior Space in Roseville?
Interior demolition timelines are controlled by permit scheduling, material testing, and crew availability — not by when you call. The sooner you reach out, the sooner we can lock your mobilization date in before your GC, framing crew, or tile contractor needs the space cleared.
Most Roseville and Placer County strip-out projects complete within 5 to 10 business days of first contact. Weekend and after-hours commercial slots book on a first-confirmed basis and fill fast. Mike Pina will assess your space, identify any pre-1980 material risks, and hand you a written fixed-price estimate before leaving your property. Speak directly to Mike Pina for an instant phone estimate and fast 24-hour on-site interior walkthrough.
Frequently Asked Questions
How much does interior gut demolition cost in Roseville?
Interior demolition costs range between $1,800 for residential kitchens and bathrooms up to $15,000 for large commercial tenant spaces, depending on square footage, material types, and access constraints.
How do you prevent dust from spreading to other parts of my house or building?
We build full floor-to-ceiling plastic containment walls, cover HVAC vents, and operate HEPA-filtered negative air machines to ensure 100% dust containment.
Do you handle commercial tenant improvement (TI) demolition?
Yes. We specialize in commercial TI strip-outs, removing drop ceilings, office partitions, carpeting, tile, and non-structural fixtures on tight night/weekend schedules.
Can you perform interior demolition in an occupied building while other tenants are still operating?
Yes. We schedule interior demolition work around active business hours, including nights and weekends. Our HEPA containment systems and electric demolition tools minimize noise and dust impact to neighboring occupied suites, allowing us to maintain full compliance with OSHA 29 CFR 1926.1153 while adjacent businesses continue normal operations.
Do you test for asbestos or lead paint in drywall and floor tile before interior demolition?
Yes. California law requires pre-demolition asbestos testing in residential structures built before 1980 and commercial buildings of any age before drywall or floor tile removal. We coordinate testing through a California-licensed asbestos inspector and arrange licensed abatement before our mechanical strip-out crew begins work.
Can you remove mold-contaminated drywall and building materials during an interior gut?
Yes. When active mold is discovered during interior strip-outs, we pause mechanical work, establish additional containment zones, and coordinate with a California-licensed mold remediation contractor to treat and remove contaminated materials under California Health and Safety Code Section 17920.3 mold disclosure standards before resuming demolition.
What happens to all the drywall, tile, carpet, and cabinets you remove?
All demolition debris is sorted by material type on-site. Wood framing and clean drywall are loaded into debris boxes and hauled to Placer County authorized waste facilities. Metal studs, copper wiring, and aluminum ductwork are sorted and recycled. We provide debris weight manifests upon request for your project records.
Do you obtain permits for interior non-structural demolition work in Roseville?
Most purely cosmetic non-structural interior strip-outs (drywall, flooring, cabinetry) do not require a permit from the City of Roseville Building Department. However, if the scope includes removal of mechanical, electrical, or plumbing systems or any structural modifications, we file the appropriate building permits before work begins.